IDM-30EN 30FXO/FXS 4E1 2*100M Ethernet over fiber Multiplexer datasheet PDH Optical Multiplexer
IDM-30EN 30FXO/FXS 4E1 2*100M Ethernet over fiber Multiplexer
Overview |
IDM-30EN transmits up to 30 channels of voice, 2 channels of Ethernet and 4 channels of E1 over a pair of fiber (or one single fiber).With all FXO/FXS modules soldered to the main board, this model is more cost-effective than modular ones and also has a more stable performance. Besides, 4 E1 channels are able to provide users with extra 30 channels for 64Kbps voice/data signal transmission, which makes IDM-30EN also very expandable.
Feature |
v Transmission medium is fiber .
v Standard 19”1U housing, easy to install.
v Fixed configuration, not modular, makes it very cost-effective.
v The amount of voice channels is variable within 30.
v DIP switch and LED alarm indication available.
v 2 channels 10/100Mbps shared Ethernet ports supporting VLAN.
v 4 E1 transparent transmissions make it very expandable.
Specification |
Optical interface
Physical connector |
FC/ SFP |
Mode |
Single mode |
Rate |
155bps±50ppm |
Wavelength |
1310nm/1550nm |
Consumption |
-2~-11dBm |
Sensitivity |
Better than -36dBm |
E1 interface
Physical connector |
BNC |
Code |
HDB3 |
Compliance |
ITU-T G.703 |
Impedance |
75Ω(By default) |
Framing |
PCM30/31 |
Transmission |
Transparent transmission |
Ethernet interface
Physical connector |
RJ-45 |
Rate |
10/100M Base-T |
Compliant with |
IEEE802.3 |
Duplex |
Full duplex/half duplex/ Auto-negotiation |
FXO/FXS interface
Loop current |
25mA |
Frequency range |
300Hz~3400Hz |
Impedance |
200Ω+560Ω//0.1μF |
Compliance |
ITU G.711 A-Law |
Power supply and consumption
Power supply |
DC-48V /AC 220V/Dual |
Consumption |
≤60W |
Working environment
Temperature |
0ºC~40ºC |
Humidity |
≤90%( non-condensing) |
Application |