IDM MTP-155 military Intelligent multi service Optical Transmission Equipment

IDM MTP-155 military intelligent multi service Optical Transmission Equipment

1. Description

According to the demand for field operation of army, Sinotech Intellisoft launches the Field Intelligent multi service Optical Transmission Equipment. E1 signal, audio signal, telephone/magnet signal and line speed 100M Ethernet signal are multiplexed in STM-1 (155Mbit/s) fiber or E1 channels for transmission. IDM MTP-155 supports the transmission channel of STM-1 and E1 is intelligent mutual backup.

IDM MTP-155 is designed for army field communication. The device uses modular function design, including SDH optical transmission unit, E1 link interface control unit, EOS unit, PCM unit, SNMP unit, protection switching unit. Adopts shockproof, waterproof and electromagnetic compatible chassis design. Service interfaces satisfy for using of army field, the device support 4 channels 10/100M Ethernet, 16 channels E1, 16 channels 2/4 Wire, one channel V35, 2 channels V24, one channel E1 link and V35 channel. It also has 4 expansion slots, can be inserted many kinds of service cards.

Front panel                             Back panel

2. Function features

1. Standard 19 inch 3U chassis design

2. System adopts modular design, the service access slot has versatility, and can access all kinds of required services according to user configuration needs

3. Support the intelligent mutual backup between E1 link and SDH link.

4. Support local telephone switch function, support 1~2 channels E1 digital trunk interface (support NO.7, PRI and No.1 signaling)

5. Support SNMP network management protocol, remote device service configuration, north interface, unloading of alarm information

6. Support power supply hot backup, support the optical interface removability

7. Support STM1 optical interface, E1 service, FXS/FXO, Magnate, v.24, v.35 and Ethernet service.

8. Support to insert dispatch board, connect dispatch, support less than 60 channels voice service (FXO, FXS, E&M voice, Mag, VHF, HF) and other dispatching function.

9. Support E1 link interface

10. Support multi function 2 wire audio card, each disk support 16 channels 2 wire audio, each 2 wire audio can be configured as FXO/FXS/ hotline / magnet /2100 magnet mode.

11. All interfaces are designed by aerial plug

12. The equipment has good waterproof and Moisture-proof design

3. Technical specification

3.1 Optical Interface

3.2 E1 interface

3.3 Ethernet Interface

4. Environment index

4.1 Working/storage environment

Temperature: -25℃～55℃

Storage Temperature: -40℃～75℃

Relative humidity: ≤95％, no condensation

4.2 Working power supply

Equipment adopts AC 220V and DC-48V/DC 24V input

l                      AC voltage: 187V~253V

l                      DC voltage: DC -38V~-58V        /DC -19V~-28V

5. Application

Schematic diagram of multi service transmission function

Schematic diagram of command and dispatch function