IDM-30 OPT 30 channels telephone PDH Optical Multiplexer datasheet
IDM-30 OPT
Description:
IDM-30 OPT can transmit the voice signal or data signal to the distant point over fiber. It can support 10 groups optical interfaces and each optical interface can support 30 channels telephone, 2 groups 100M Ethernet interface, 4E1 interface. The whole set adopts 19” 6U, can be inserted 12 disks, 10 business disks, 2 power disks.


Function description
10 groups 155M optical interfaces;
Dual power supply disks, 1+1 backup;
16-30 channels telephone;
2 groups 100M Ethernet ports, can be divided VLAN;
4 groups E1 interfaces;
12 groups disks, 10 groups optical interfaces;
Technology parameter
FXO、FXS interface
|
Impedance |
200Ω+560Ω//0.1μF |
||
|
Audio range |
300Hz―3400Hz |
Compression ratio |
ITU G.711 A Law |
|
LOOP Current |
25mA/channel |
|
|
Optical interface
|
Fiber rate |
150Mb/s±50ppm |
Wavelength |
1310nm |
|
Light output power |
-2~-11dBm |
Receiving sensitivity |
Better than -36dBm |
|
Receive dynamic range |
34dB |
Interface form |
FC/SC |
Ethernet port
|
Interface type |
RJ-45 |
Transmission rate |
10M/100M adaptive |
|
Standard protocol |
Support IEEE802.3 |
Working mode |
Full / half duplex / adaptive |
Environment
|
Working temperature |
0ºC--40ºC |
Humidity |
90%(No condensation state) |
Power consumption
|
Power supply |
AC220V/DC- 48V |
|
Consumption |
40W±10% |
Size
|
Length * depth * height |
3960mm* 2070mm * 270mm |
Application Example

86-18710178699
xufei@rdtcom.com