IDM MUX90 datasheet
IDM MUX90
Overview |
IDM MUX90 is based on SDH technology as the core, STM-1 level of multi service SDH access equipment, technical performance fully meet the ITU-T standard. The device provides users with a variety of access and SDH optical transmission, providing A, B two 155.52Mbps optical interface, providing 4 10M/100M Ethernet interface and multi group E1 interface and 64K services. IDM MUX90 for the formation of point to point, point to multi-point chain and ring transmission network. IDM MUX90 multi service access platform can be widely used in telecom data services, electricity, banking, public security, military and other departments of public telephone network access or private line information transmission.
Feature |
v 19 inches standard 3U chassis, insert disc design; provide9* 3U users insert disk slot .
v Fusion of SDH transmission, PBX voice exchange, PCM service access and video access technology in equipment
v Provide TDM interface between the 252 x 252 VC-12 class without blocking cross, support one-way, two-way and broadcast services
v Single disk to provide the 64K level of cross capability: 512 x 512 64K level without blocking cross, support one-way, two-way and broadcast services
v The STM-1 optical access, which supports the 2 way SFP interface, can be composed of a ring network, a chain network and a star network.
v Can support 4 groups physical isolation EoS Ethernet, each EoS bandwidth is N * VC12 (N=1~50) can be set in each group; and provide 1 sets of extended Ethernet port reservation; and supporting the use of 8FE disk expansion Ethernet interface number
v Provide 2 Wire audio card: 3U-8MVOICE; each disc provides 8 channels 2 Wire radio; each 2 Wire radio can be configured to FXO/FXS/ hotline / magnetic /2100 magnet model
v Provide 9 users slot can be inserted into a variety of business disc to provide voice and data services for PDH, E1, FXO/FXS, V.24/V.28/V.35, EM2/4, telephone hotlines, magneto telephone, high fidelity audio and X.50 and 10m / 100M Ethernet access
v can insert a 3UMPCONV user port expansion disk, WG300 disk exchange signaling
v Standard models have no relay transmission distance of 40 km; more than the transmission distance can be customized
v Provides DCC, E1, N*64K and TCP/IP Ethernet management channel, providing SNMP simple network management protocol
v -48V DC and 220V AC, optional DC+DC, AC+AC, AC+DC dual backup power supply
Specification |
Optical interface
Physical connector |
SFP |
Mode |
Single mode/Multi-mode |
Rate |
155.52Mbps/155.52Mbps |
Wavelength |
1310nm/1550nm |
Consumption |
-12~-6dBm |
Sensitivity |
Better than -32dBm |
E1 interface
Physical connector |
BNC |
Code |
HDB3 |
Compliance |
ITU-T G.703 |
Impedance |
75Ω(By default)/120Ω |
Framing |
PCM30/32 |
Transmission |
Transparent transmission |
Ethernet interface
Physical connector |
RJ-45 |
Rate |
N×VC12(N≤50) |
Compliant with |
IEEE802.3 |
Duplex |
Full duplex/half duplex/ Auto-negotiation |
FXO/FXS interface
Loop current |
20mA |
Frequency range |
300Hz~3400Hz |
Impedance |
200Ω+560Ω//0.1μF |
Compliance |
ITU G.711 A-Law |
Power supply and consumption
Power supply |
DC-48V /AC 220V/Dual |
Consumption |
≤90W |
64K interface
Code type |
G.703 standard |
Code rate |
64Kbps |
Impedance |
Balance120Ohm |
Comply with ITU G.703 |
|
Magnet interface
Audio range |
300Hz~3400Hz |
Impedance |
Balance 600Ohm |
Compression ratio |
ITU G.711 A Law |
Return loss |
Better than 18dB |
EM2/4 Wire interface
Audio range |
300Hz~3400Hz |
Impedance |
Balance 600Ohm |
Compression ratio |
ITU G.711 A Law |
Return loss |
Better than 18dB |
V.24 interface
Transmission rate |
Asynchronous<=9600bps Synchronous 64Kbps |
Electrical characteristics |
Comply with CCITT V.28 |
V.35 interface
Interface type |
RJ45 |
Electrical characteristics |
Comply with ITU-T V.35 |
Transmission rate |
N*64Kbps (n=0~31) |
Terminal interface |
Comply ISO2593 |
Working environment
Temperature |
-20ºC~50ºC |
Humidity |
0~95% (non-condensing) |
Application |