IDM MUX180 180 channels 64K business access MSTP Optical Multiplexer datasheet SDH Optical Multiplexer
IDM MUX180
Overview |
IDM MUX180 is a new generation of optical transmission equipment based on MSTP technology and PCM technology. It centralized the MSTP transmission, PCM multi service access functions, which can meet the needs of users of broadband and narrowband multi service optical fiber transmission and access, the use of SDH ring protection function to provide more reliable communication protection. IDM MUX180 integrated machine directly connected terminal remote telephone, computer, camera, etc., in the distal can also by burring extension, connection PDH optical transmitter, cat and multi service transmitter, and other, to adapt to a variety of network topology.
Feature |
v 19 inches standard 3U chassis, insert disc design; provide 17 3U users insert disk slot .
v Two SFP type of STM-1 optical interface, support SDH ring network, chain network, to provide branch 1+1 channel protection
v Provide TDM interface between the 252 x 252 VC-12 class without blocking cross, support one-way, two-way and broadcast services
v Support up to 180 channels 64K business access.
v Can support 4 groups physical isolation EoS Ethernet, each EoS bandwidth is N * VC12 (N=1~50) can be set in each group; and provide 1 sets of extended Ethernet port reservation; and supporting the use of 8FE disk expansion Ethernet interface number
v Provide 2 Wire audio card: 3U-8MVOICE; each disc provides 8 channels 2 Wire radio; each 2 Wire radio can be configured to FXO/FXS/ hotline / magnetic /2100 magnet model
v Provide 17 users slot can be inserted into a variety of business disc to provide voice and data services for PDH, E1, FXO/FXS, V.24/V.28/V.35, EM2/4, telephone hotlines, magneto telephone, high fidelity audio and X.50 and 10m / 100M Ethernet access
v can insert a 3UMPCONV user port expansion disk, WG300 disk exchange signaling
v Standard models have no relay transmission distance of 40 km; more than the transmission distance can be customized
v Provides DCC, E1, N*64K and TCP/IP Ethernet management channel, providing SNMP simple network management protocol
v -48V DC and 220V AC, optional DC+DC, AC+AC, AC+DC dual backup power supply
Specification |
Optical interface
Physical connector |
SFP |
Mode |
Single mode/Multi-mode |
Rate |
155.52Mbps/155.52Mbps |
Wavelength |
1310nm/1550nm |
Consumption |
-12~-6dBm |
Sensitivity |
Better than -32dBm |
E1 interface
Physical connector |
BNC |
Code |
HDB3 |
Compliance |
ITU-T G.703 |
Impedance |
75Ω(By default)/120Ω |
Framing |
PCM30/32 |
Transmission |
Transparent transmission |
Ethernet interface
Physical connector |
RJ-45 |
Rate |
N×VC12(N≤50) |
Compliant with |
IEEE802.3 |
Duplex |
Full duplex/half duplex/ Auto-negotiation |
FXO/FXS interface
Loop current |
25mA |
Frequency range |
300Hz~3400Hz |
Impedance |
200Ω+560Ω//0.1μF |
Compliance |
ITU G.711 A-Law |
Power supply and consumption
Power supply |
DC-48V /AC 220V/Dual |
Consumption |
≤90W |
64K interface
Code type |
G.703 standard |
Code rate |
64Kbps |
Impedance |
Balance120Ohm |
Comply with ITU G.703 |
|
Magnet interface
Audio range |
300Hz~3400Hz |
Impedance |
Balance 600Ohm |
Compression ratio |
ITU G.711 A Law |
Return loss |
Better than 18dB |
EM2/4 Wire interface
Audio range |
300Hz~3400Hz |
Impedance |
Balance 600Ohm |
Compression ratio |
ITU G.711 A Law |
Return loss |
Better than 18dB |
V.24 interface
Transmission rate |
Asynchronous<=9600bps Synchronous 64Kbps |
Electrical characteristics |
Comply with CCITT V.28 |
V.35 interface
Interface type |
RJ45 |
Electrical characteristics |
Comply with ITU-T V.35 |
Transmission rate |
N*64Kbps (n=0~31) |
Terminal interface |
Comply ISO2593 |
Working environment
Temperature |
-20ºC~50ºC |
Humidity |
0~95% (non-condensing) |
Application |