IDM 4E1 to 4ETH converter（RDTCOM）

Our product 4E1 to Ethernet converter IDM 4E1-ETH is a protocol converter use inverse multiplexing technology. IDM 4E1-ETH can make many channel E1 transfer 10M/100M Ethernet. It can make 4E1 channel and Ethernet interface intercommunication. The max Ethernet bandwidth is 7.92M. IDM 4E1-ETH is used in Lan-To-Lan, Bureau of the inter-connection, VOD, remote control, Switches of E1 interface card etc.

Contact Us

IDM 4E1 to 4Ethernet converter

Feature

1. Standard 19 inch 1U housing structure and easy to install.

2. 4 Ethernet and 4 E1 inverse multiplexing, Support TAG VLAN setting

3. Support E1 channel delay detection function, The max relative delay in E1 channel is 220ms

4. Can transfer jumbo frame, support Ethernet switchboard with VLAN faction.

5. Can delete the faulted E1 channel automatic. it can automatic recover when the faulted is deleted

6. Support RS232 interface

7. Support GFP-F, meet ITU-T G.7041 standard.

8. Support 2M line loopback function

9. Can transparent transmission Jumbo Frame that meet IEEE 802.1Q, support Ethernet converter with VLAN function.

Specification:

E1 interface

Code pattern	HBD3	Code rate	2048Kbps±50ppm
Impedance	75Ω / 120Ω	frame structure	PCM31/30
JITTER standard	ITU-T G.823	Standard Protocol	ITU-T G.703/G.704

Ethernet interface

interface type	RJ45	Rate	10M/100M
Standard Protocol	IEEE802.3	Working mode	Full/Half duplex

Power supply

Power supply

AC220V/DC-48V/dual

power consumption

≤5W

Environmental conditions

Work Temperature	15ºC~65ºC	storage temperature	-25ºC~75ºC
Humidity	0- 95% (non-congelation state)

Product model

Type	describe
IDM 1E1 network bridge	Achieve 4 Ethernet data to 1E1 inverse multiplexing
IDM 4E1 network bridge	Achieve 4 Ethernet data to 4E1 inverse multiplexing
IDM 8E1 network bridge	Achieve 4 Ethernet data to 8E1 inverse multiplexing